Mask Filters

MASK FILTERS

According to research, a person who reaches the age of 68 will have breathed approximately 300,000 3 air. Considering this amount, it is of great importance that the air passing through our lungs is clean. When breathing air becomes dangerous, respiratory protection is needed to prevent acute or chronic health problems caused by reduced oxygen content. In addition, with the globalization of the COVID epidemic, which is a big problem in our country, each of us is concerned about their health and safety. The most important situation to be prevented in the COVID epidemic is the airborne transmission of the disease.

At this point, as MEMSİS, we are proud to produce solutions that meet the needs of changing times with our expert staff who have every principle of continuous improvement. It is used in the mass production of face masks in N95, N99, FFP1-2 and 3 standards, which are produced entirely by MEMSIS and are domestically produced.

filtre

As MEMSIS, our newest product, "Non-Woven" textile with 99% particle filtration efficiency;

✓ Face masks,
✓ Dust masks,
✓ Surgical masks,
✓ HEPA filters,
✓ Dust filters,
✓ Cabin filters,
✓ Vacuum cleaner filters,
✓ Syringe filters,
and it has been used successfully in other high-tech air filtration applications.

How is the Filter Structure?

Our nanofiber non-woven textile material consists of three layers;

Layer 1: Low density non-woven spunbond backing layer
Layer 2: High efficiency nanofiber net coating for enhanced filtration
Layer 3: Low density non-woven spunbond protective layer

Why Should You Use Our Product?

The advantages of our “Non-Woven” textile, which is a first class nanofiber performance layer filter produced locally by MEMSIS;

High Efficiency and Longevity

The primary function of a dust collector is to control and minimize emissions produced by a manufacturing process. Most industrial dust collectors use some method to manage dust build-up on the filter surface throughout the life of the filter. The dust collected by the nanofiber performance layer filter accumulates on the surface of the filter, not inside the filter area. In this way, cleaning takes place with less impact. In this way, the life of the product is extended. Its longevity due to its efficiency and surface load is one of the most important advantages for our customers in terms of cost.

Save Your Energy

In most dust collection systems, the process of taking the dust-laden air from a pollutant source and passing it through the filter is done by an air fan. The nanofiber performance layer works more efficiently as it catches the dust on the filtering surface. In this way, energy consumption is much lower and the same cleaning can be done with lower capacity fans.

Easy Cleaning

Our “Non-Woven” textile requires a much lower amount of compressed air to be cleaned thanks to its nanofiber performance layer.

Low Emission

The filters produce much less emissions during cleaning thanks to the nanofiber performance layer.

As MEMSİS, we are proud to produce solutions suitable for the needs of changing times with our expert staff who have every principle of continuous improvement. It is used in the mass production of face masks in N95, N99, FFP1-2 and 3 standards, which are completely produced by MEMSIS and are domestic production. If you, our valued customers, would like to receive information about our products, we look forward to your contact.

Innovative and sustainable projects in membrane systems.
Achieve high standards with MEMSIS.